Function of the OBS -LE Series Plastic Pressure Transmitter in the Chemical Processing Industry


When it comes to instruments designed to measure corrosive liquids the OBS LE series plastic pressure transmitter is an excellent choice. It ensures maximum control with outstanding accuracy of ±0.5%.  Its corrosion free technology makes it industry’s top choice. The OBS-LE series plastic pressure transmitter is constructed of thermoplastic materials to prevent any exterior and interior corrosion that may occur when installed into a sodium hypochlorite chemical skid applications.

A market leading chemical dosing skid manufacturer was searching for a plastic pressure transmitter to standardize on flow their sodium hypochlorite systems; they were tired of all the corrosion occurring on the stainless-steel units with diaphragm seals than they settled on The OBS-LE plastic pressure transmitter and they are satisfied with the results.


The OBS-LE plastic pressure transmitter features an LED display on the body of the plastic pressure transmitter, and the LED display will change color based on the pressure range. The red LED on the plastic pressure transmitter will indicate an upset condition, and the client should address the plastic pressure transmitter to ensure it is preventing a failure. The green LED notification on the OBS-LE plastic pressure transmitter will provide details that the acid skid system is OK and working properly.

One of the great things about the OBS-LE plastic pressure transmitter is that the outputs which consist of a 4-20mA will continuously monitor the pressure from the OBS-LE plastic pressure transmitter and can communicate to a remote display or PLC. It also has two relay outputs that the customer can take from the OBS-LE plastic pressure transmitter to a pump or controller.

A lot of chemical skid manufacturing companies will also use the OBS-LE plastic pressure transmitter to prevent any over-pressurization of a filter or strainer application which will prevent any debris from entering the system. The OBS-LE plastic pressure transmitter is available in PVC, PP, PVDF and PTFE Teflon process connections that can be offered in either female NPT or male NPT. It is the perfect solution for chemical process.


Comments

  1. UnknownMay 30, 2018 at 1:15 AM

    A very nice and informative post about plastic pressure transmitter. I found it very useful for me.

    ReplyDelete

Post a Comment

Popular posts from this blog

Top Reasons Why You Should Select a Paddle Wheel Flow Meter

Image
The primary role of a flow meter is to manage the flow of liquid substances. The flow meter measures the flow of water or fluids to tell you how many liters you have already used, or how much flow do you have currently. Similarly, paddle wheel flow meters can measure accurately the volumes of water or other flowing fluid. In short, they are used for monitoring the liquid flow rates. These paddle wheel flow meters are also known as inline flow meters or insertion flow meter. Paddle Wheel Flow Meter Paddle wheel flow meter response fast, it works well with the clean fluids. A flow meter has three components: Pipe fitting, Paddle wheel sensor, and flow display. The pipe fitting can be used in different applications. The Paddle wheel sensor is an electronic sensor where magnets are embedded with the paddle wheel. While the fluid flows through the pipes it causes spinning of the paddle wheel. The magnets help the electrical pulse to calculate the ratio of the spinning. The ‘Flow D...
Read more

4 Common Types of Liquid Level Sensors and Their Uses

Image
We know that liquid level sensors are used for monitoring free-flowing substances to regulate the process in a particular way. Usually, these substances are liquid. However, some solids like powdered substances can be measured by the liquid level sensor. Most of the liquid level sensors are used industrially. These have been in markets for decades. Food and beverage, agriculture, printing, medical and domestic, and automotive industries use these type of sensors for level measurement or leak detection. For instance, liquid level sensors are used in cars to monitor liquids including oil, fuel or power steering fluid.  You can also found them in household machines such as a coffee machine. A level sensor is used to identify a liquid rise and fall point, total amount of liquid in a container, and continuous measurement of volume. The primary purpose of using a level sensor is to monitor and regulate the liquid level within a contained space such as huge tanks and vessels. ....
Read more

Why Leak Detection Switch Is So Important For Double Walled Tanks

Image
When it comes to chemical processing companies, for most aggressive chemical tank applications, clients will look to get a dual-contained tank. A dual contained tank is essentially a tank within a tank and it prevents a leak that may cause an injury or fines. A leakdetection switch is a mean to ensure that if there is a crack in the primary tank the operator will be made aware of the leak prior to it filling up and overflowing into the environment. One of market’s finest switches is LD series leak detection switch. The LD series leak detection switch for chemicals or water was manufactured to eliminate the overfilling of the secondary containment but to also ensure that the operators are informed on when a leak occurs. A leading tank manufacturer that specializes in double walled tanks has now standardized on the LD series leak detection switch for all chemicals. The LD series signal can be connected directly to a ProAlert Audible/Visual alarm which will most certainly get som...
Read more