Why Leak Detection Switch Is So Important For Double Walled Tanks

When it comes to chemical processing companies, for most aggressive chemical tank applications, clients will look to get a dual-contained tank. A dual contained tank is essentially a tank within a tank and it prevents a leak that may cause an injury or fines. A leakdetection switch is a mean to ensure that if there is a crack in the primary tank the operator will be made aware of the leak prior to it filling up and overflowing into the environment. One of market’s finest switches is LD series leak detection switch.

The LD series leak detection switch for chemicals or water was manufactured to eliminate the overfilling of the secondary containment but to also ensure that the operators are informed on when a leak occurs. A leading tank manufacturer that specializes in double walled tanks has now standardized on the LD series leak detection switch for all chemicals. The LD series signal can be connected directly to a ProAlert Audible/Visual alarm which will most certainly get someone attention.

The LD series leak detection switch is compact and small enough to slip in-between the two tank walls to ensure that if a leak does occur it will be noticed right away. It can be communicated to an alarm or a pump to shut it off as soon as there is a leak picked up by the LD series leak detection switch for chemicals or water and stops the pump from adding more liquid to the chemical holding tank.

 Another method of ensuring that a leak doesn’t occur besides installing the LD series leak detection switch for chemicals or water is to utilize a tank level sensor. The 100-series tank level sensor is a submersible tank level sensor that will sit in the bottom of the tank and provide continuous level measurement of the acid or caustic in the chemical holding tank.

If the 100-series chemical level transmitter discovers that the tank level is dropping too quickly than they will be able to set alarms to alert the operator that the tank has dropped below the set point that would allow them to know that they have a leak within the primary tank and this could prevent any overfilling of the secondary tank containment.

The LD series leak detection switch is not only essential for health and safety of operators but it’s also the best equipment to minimize the cost by reducing wastage of expensive chemicals. Due to the super benefits of The LD series leak detection switch, it’s the first choice of chemical processing firms.